SPECIALITY CHEMICALS
KemCare UK*N.B If you are looking at a product: Scroll down to the bottom of the description below to see if example formulations incorporating this product are available...
Sun Fluid Spray (SPF 30+)
Id:
SC-DE/00/181/51
IMPORTANT: Suggestions for the use and application of the products and guide formulations are given for information purposes only and without commitment.
Phase
Component
INCI
%
Function
I.
EMULGADE® PL 68/50
Cetearyl Glucoside (and) Cetearyl Alcohol
1,0
O/W Emulsion Base, selfemulsifying
LANETTE® E
Sodium Cetearyl Sulfate
1,0
Co-emulsifier
MYRITOL® 331
Cocoglycerides
8,0
Emollient
CETIOL® CC
Dicaprylyl Carbonate
5,0
Emollient
COPHEROL® F 1300
Tocopherol
1,0
Active ingredient
KemCare
Ethylhexyl Methoxycinnamate
7,5
UV-B filter
KemCare
Octocrylene
9,0
UV-B filter
II.
Z-Cote HP1 (BASF)
Zinc Oxide (and) Dimethicone
5,0
Pigment
Laponite XLG
Sodium Magnesium Silicate
2,0
III.
Glycerin
Glycerin
3,0
Water, de-ionized
Aqua
57,5
IV.
Preservative
q,s,
Perfume
q,s,
Citric Acid 50%
Citric Acid
q,s,
pH-value
7,2
Viscosity (mPas) Brookfield RVT 23°C spindle 5, 10rpm
20000
mPas
Preparations in the laboratory
Phase I: Mix Emulgade PL 68/50, the oils, the UV filters and Lanette E at approx. 50°C temperature
and stir for approx. 15 minutes to disperse Lanette E. Phase II: Add Laponite XLG and Zinc Oxide and disperse homogeneously
for 15 minutes. Homogenise the oil / pigment phase by means of a suitable dispersion unit (e.g. Ultra Turrax). Phase III:
Add the cold water phase to the oil / pigment phase while stirring. Stir for 15 minutes. Avoid incorporation of air. Homogenise
once again by means of a suitable dispersion unit (e.g. Ultra Turrax) in order to improve stability and structure. Continue
stirring for about 5 minutes. Phase IV: Add preservative and perfume when suitable. If neccessary adjust the pH-value.
Copyright © 2005-2006 KemCare Limited